REPLY: 1:214/23@fidonet 62e6765c
TZUTC: -0400
CHRS: CP437 2
NOTE: IceEdit 2.35 K96741
MSGID: 1:229/664.1 c8f7ee78
PID: Telegard 3.09.g2-sp4/mL
TID: hpt/w32-mvcdll 1.9 2022-07-03
 *** Quoting Ray Quinn from a message to Michiel van der Vlist ***

 RQ> I once had mine set up for this. For the life of me, I cannot find
 RQ> out what I did to make it work. It seems that I failed to backup the
 RQ> network settings when "upgrading" the last time. Can someone point me
 RQ> in the right direction? Using Debian 11 (bullseye)

This is how I have it setup on Ubuntu 20.04.4 LTS.  I had to do something 
different on my Pi install, but I can't find those instructions anymore, it 
was more complicated.


sudo nano /etc/netplan/00-installer-config.yaml

# This is the network config written by 'subiquity'
network:
  ethernets:
    ens160:
      dhcp4: true
      ipv6-address-token: "::f1d0:1:229:664"
  version: 2


I believe all of the lines were already there, I just had to add in the the 
ipv6-address-token line.


Jay

... I've started sleeping in our fireplace. Now I sleep like a log!

--- Telegard v3.09.g2-sp4/mL
 * Origin: Northern Realms/TG ì tg.nrbbs.net ì Binbrook, ON (1:229/664.1)
SEEN-BY: 1/123 15/0 90/1 105/81 106/201 120/340 123/131 129/331 153/7715
SEEN-BY: 218/700 226/30 229/110 111 112 113 206 317 400 424 426 428
SEEN-BY: 229/470 550 664 700 266/512 282/1038 317/3 320/219 322/757
SEEN-BY: 342/200 396/45 633/280
PATH: 229/664 426