TID: FMail-W32 2.3.0.1-B20240319
RFC-X-No-Archive: Yes
TZUTC: 0200
CHRS: CP850 2
MSGID: 2:280/5555 66fef5b6
REPLY: 2:5001/100.1 66fe7fc4
Hello Dmitry,

On Thursday October 03 2024 12:22, you wrote to me:

 MV>> Thanks for the offer but I do not have an SFP comatible router at
 MV>> hand and this is not a good time to start such a major project.I
 MV>> am still in the process of tuning my Fidonet system after six
 MV>> month of absence and that takes a lot of time. Not to mention
 MV>> other time concuming projects in and around the house.

 DP> Another option is a dumb GPON-to-Ethernet bridge as separate device,

Yes. apparently such device are available but there are hard to get.

 DP> but I've never tried them myself. The main issue with these 3rd-party
 DP> devices is to obtain all required parameters from provider's router,
 DP> which is sometimes not possible without the provider's support :(

Yes that can be problematic.

But right now I have other priorities than engaging in such an adventure.
Fortunately the fiber is "open". One can choose between half a dozen ISPs. So
if my pesent ISP cab not solve the problem with the IPv6 pinholing in their
modem/router I will simply switch provider when the contract expires...


Cheers, Michiel

--- GoldED+/W32-MSVC 1.1.5-b20170303
 * Origin: he.net certified sage (2:280/5555)
SEEN-BY: 10/0 1 19/10 90/1 103/705 104/117 105/81 106/201 124/5016
SEEN-BY: 153/757 7715 154/10 30 203/0 214/22 218/0 1 215 700 860 870
SEEN-BY: 218/940 221/0 226/30 227/114 229/110 114 206 317 400 426
SEEN-BY: 229/428 470 550 616 664 700 240/1120 5832 250/1 266/512 280/464
SEEN-BY: 280/5003 5006 5555 282/1038 291/111 292/854 8125 301/1 310/31
SEEN-BY: 320/219 322/757 341/66 234 342/200 396/45 423/120 460/58
SEEN-BY: 467/888 633/280 712/848 770/1 5019/40 5020/400 545 1042 5053/58
SEEN-BY: 5075/35
PATH: 280/5555 464 103/705 218/700 229/426