MSGID: 2:5001/100.1 68f4daf1
REPLY: 2:280/5555 68f4cc7f
CHRS: CP866 2
TZUTC: 0300
TID: hpt/mac 1.9 2024-03-02
Hello, Michiel!

Sunday October 19 2025 13:33, you wrote to me:

 MV> What I liked and what I miss in the latest version is the showing of
 MV> the IPv6 address(es) when hovering the mouse cursor over the host name
 MV> field. It is how I quickly spotted a host name with a ULA. I'd like to
 MV> have it back. The new addition of fields for copying the host name,

It could be a browser incompatibility issue - I just found that it wasn't
working in my Safari, but working in Firefox.
I've made some changes - could you try again and refresh the page with
clearing cache?
Not sure which browser you are using, so don't know the exact shortcut.

 MV> And just one more thing I'd like: Splitting up the IPv6 only category
 MV> in two. One just like the one you have now, IPv6 noes with non
 MV> functioning IPv4 and the other for pure IPv6 only nodes, nodes that
 MV> only advertise one or more IPv6 addresses and no IPv4 address at all.

Done! "Pure IPv6 Only".


Best regards,
             dp.

--- GoldED+/OSX 1.1.5-b20250409
 * Origin: All is good in St. John's Wood (2:5001/100.1)
SEEN-BY: 10/0 1 19/10 50/109 103/705 104/117 105/81 106/201 124/5016
SEEN-BY: 128/187 129/14 153/757 7715 154/10 30 110 201/0 203/0 214/22
SEEN-BY: 218/0 1 215 610 620 700 840 860 221/1 6 360 226/30 227/114
SEEN-BY: 229/110 206 317 400 426 428 470 616 664 700 705 230/0 240/1120
SEEN-BY: 240/5832 263/1 266/512 280/464 5003 5006 5555 291/111 292/854
SEEN-BY: 292/8125 301/1 310/31 320/219 322/757 335/364 341/66 234
SEEN-BY: 342/200 396/45 423/81 120 460/58 463/68 467/888 633/280 712/848
SEEN-BY: 770/1 902/26 5000/111 5001/3 100 5015/46 5020/329 400 545
SEEN-BY: 5020/715 830 846 848 1042 4441 12000 5022/77 5030/49 1081
SEEN-BY: 5053/51 5058/104 5060/900 5061/133 5075/128 5083/1 444
PATH: 5001/100 5020/4441 1042 221/6 1 280/464 103/705 218/700 229/426