MSGID: 2:240/12 6251c19c
TZUTC: 0200
REPLY: 2:280/464.113 627d76b5
CHRS: LATIN-1 2
TID: hpt/fbsd 1.9 2021-12-02
Hello Maurice!

12 May 22 21:05, Maurice Kinal wrote to Maurice Kinal:


 MK> Errrr ... only CONFIG_GPIO_PCA953X_IRQ and CONFIG_LEDS_PCA9532_GPIO 
 MK> are not enabled.  The chipset itself is modular along with 
 MK> CONFIG_LEDS_PCA9532.

I don't think I'd need these. IRQ handling can be done (or not), and the LED
driver is further down the userland road (and to make it even more confusing,
there is leds_pca955x that would fit the chip I have). Same for i2c and sma
modules.
However, my understanding is that the gpio_pca953x module should already
report the chip in dmesg when being probed, and this does not happen.
Everything else is useless if this first step fails.

 MK> Getting old buddy.  Mind you we got uefi boots working ... again.  
 MK> Not sure that is anything worth bragging about since we'd still be 
 MK> using legacy boots if that had been an option.  :-/

I did use legacy/csm for quite some time if available. However, meanwhile uefi
works fine for me and is actually easier to set up and maintain, so I use it
on all new machines now.


Regards,
Gerrit

...  9:15AM  up 51 days, 14:21, 8 users, load averages: 0.25, 0.34, 0.40

--- msged/fbsd 6.3 2021-12-02
 * Origin: Tall orders to fulfil (2:240/12)
SEEN-BY: 1/123 15/0 90/1 103/705 105/81 106/201 114/709 120/340 123/131
SEEN-BY: 124/5016 129/305 330 331 153/757 7715 154/10 203/0 218/700
SEEN-BY: 221/0 226/30 227/114 229/110 111 206 317 400 424 426 428
SEEN-BY: 229/452 470 550 616 664 700 240/12 77 1120 1634 1895 5832
SEEN-BY: 240/8001 8002 8005 266/512 280/464 5003 282/1038 291/111
SEEN-BY: 292/854 8125 301/1 303/0 310/31 313/41 317/3 320/219 322/757
SEEN-BY: 335/364 341/234 342/200 371/0 382/147 396/45 423/120 460/58
SEEN-BY: 633/267 280 281 384 410 412 416 509 712/848 770/1 2432/390
SEEN-BY: 2452/250 413 3634/12 5020/545
PATH: 240/12 1120 2452/250 280/464 633/280 229/426