MSGID: 2:240/12 6251c19d
TZUTC: 0200
REPLY: 2:5020/545 627e0ba9
CHRS: LATIN-1 2
TID: hpt/fbsd 1.9 2021-12-02
Hello Alexey!

13 May 22 10:28, Alexey Vissarionov wrote to Gerrit Kuehn:


 GK>> I have an Intel-based mainboard with build-in gpios that I'd like
 GK>> to use. However, I cannot get the kernel (5.16) to recognise the
 GK>> chip (NXP PCA9554). To my understanding, this should be supported
 GK>> with the gpio_pca953x kernel module.

 AV> Or not supported.

https://github.com/torvalds/linux/blob/master/drivers/gpio/gpio-pca953x.c

{ .compatible = "nxp,pca9554", .data = OF_953X( 8, PCA_INT), },

From looking at the source, I think it should be supported by the existing
module. kernelconfig has the same info:

-> PCA95[357]x, PCA9698, TCA64xx, and MAX7310 I/O ports

8 bits: max7310, max7315, pca6107, pca9534, pca9538, pca9554,
pca9556, pca9557, pca9574, tca6408, tca9554, xra1202

 AV> https://www.ti.com/lit/gpn/pca9554
 AV> https://www.onsemi.com/pdf/datasheet/pca9554-d.pdf
 AV> https://www.nxp.com/docs/en/data-sheet/PCA9554_9554A.pdf

 AV> Quite enough to write your own kernel module.

Yeah, sure, but why bother if the driver is already there?


Regards,
Gerrit

... 10:21AM  up 51 days, 15:27, 8 users, load averages: 0.36, 0.44, 0.40

--- msged/fbsd 6.3 2021-12-02
 * Origin: And the pastiche we've invented (2:240/12)
SEEN-BY: 1/123 10/0 1 15/0 90/1 92/1 102/401 103/1 705 105/81 106/201
SEEN-BY: 114/709 120/340 123/131 129/305 330 331 153/7715 154/10 214/22
SEEN-BY: 218/0 1 109 501 640 650 700 810 830 840 850 860 870 880 221/1
SEEN-BY: 221/6 226/30 227/114 229/110 111 206 317 400 424 426 428
SEEN-BY: 229/452 470 550 616 664 700 240/12 1120 1634 1895 8001 8002
SEEN-BY: 240/8005 266/512 280/464 5003 282/1038 291/111 292/854 301/1
SEEN-BY: 301/113 812 303/0 313/41 317/3 320/219 322/757 335/364 341/66
SEEN-BY: 342/200 371/0 382/147 396/45 460/58 633/280 712/848 2432/390
SEEN-BY: 2452/250 3634/12 5020/1042 5058/104
PATH: 240/12 1120 301/1 218/700 229/426