REPLY: 4:801/188 ae14d4f0
MSGID: 2:280/5003.4 664763c2
CHRS: LATIN-1 2
TZUTC: 0200
TID: hpt/lnx 1.9.0-cur 2019-12-05
Hello Flavio!

16 May 24 11:45, you wrote to All:

 FB> Hello,

 FB> I am going through the .ctl file configuration, but I am stuck now at the
 FB> final section of the file:

 FB> ; Your region source data goes here.

 If you have a large region you can make it as sophisticated as you like.

 But there is also the KISS principle. You have a Region with one Net and
 maintain both. There are two easy solutions:

 1)

 make region 80 region80.000    ;"master data file", No input data
                                ; is below.

 Copy your region from a current nodelist to master/region80.000
 the name of the file is irrellevant but should comply with the line above.
 You apply changes in your segment to this file.

 2)

 make region 80
 ...
 ...


 Data

 ; Your source data goes here.

Region,80,.....
,1,Internet_Hub.........

Host,801,Rede_Bras.........
etc.


Copy your region segment from a recent nodelist here.

You apply changes to your region in the CTL file.


Including Net files is only usefull when the are multiple nets maintained
by others

 Just my 2 cents

Kees

--- GoldED+/LNX 1.1.5--b20180707
 * Origin: As for me, all I know is that, I know nothing. (2:280/5003.4)
SEEN-BY: 90/1 103/705 105/81 106/201 124/5016 128/260 129/305 135/220
SEEN-BY: 135/225 153/757 7715 154/10 30 203/0 218/700 221/0 1 226/30
SEEN-BY: 227/114 229/110 112 113 206 317 426 428 470 664 700 705 240/1120
SEEN-BY: 240/5832 266/512 280/464 1049 2050 5003 5006 282/1038 291/111
SEEN-BY: 292/854 8125 301/1 310/31 320/219 322/757 341/66 234 342/200
SEEN-BY: 396/45 423/120 460/58 467/888 633/267 280 412 418 509 2744
SEEN-BY: 712/848 770/1 5020/400 5075/35
PATH: 280/5003 464 633/280 229/426