REPLY: 1:320/219@fidonet 60ad5ef3
MSGID: 2:250/1@fidonet 60b4d6a2
CHRS: UTF-8 2
TZUTC: 0100
TID: MBSE-FIDO 1.0.7.22 (GNU/Linux-x86_64)
Hello Andrew!

Tuesday May 25 2021 16:28, you wrote to me:

 > Hello Vincent!

 > 25 May 21 16:07, you wrote to all:

 VC>> Despite it only tossing pkt's in var/inbound. If not it will
 VC>> leave all .pkt and .PKT alone with no hint what so ever why in
 VC>> the log files. In my case these pkt's are from valid uplinks.

 VC>> Note in my system var/inbound is set for both protected and not
 VC>> under option 1.4.2 & .3.

 > This is defeating the purpose of having a separate inbound for secure
 > sessions. The new feature is not needed in your setup; as all packets
 > would end up being tossed anyway.  Having both inbounds set to the
 > same path is NOT RECOMMENDED as it will leave your system vulnerable
 > to mail bombs.

Point made, I have now changed it (1.4.10.2) to ./var/unknown and turned off
1.11.21 to see what happens in my inbound area regarding *.PKT's however the
packets coming in are from a known system.


Vincent
--- Mageia Linux v7.1 X64/Mbse v1.0.7.21/GoldED+/LNX 1.1.5-b20180707
 * Origin: Air Applewood, The Linux Gateway to the UK & Eire (2:250/1)
SEEN-BY: 1/123 18/200 25/0 21 30/0 90/1 103/705 105/81 120/340 123/131
SEEN-BY: 129/305 154/10 218/700 221/1 6 226/30 227/114 229/101 424
SEEN-BY: 229/426 452 550 700 1016 1017 240/1120 5832 249/206 317 400
SEEN-BY: 250/0 1 2 3 4 5 6 7 8 10 261/38 263/0 280/464 282/464 1038
SEEN-BY: 292/854 298/25 301/0 1 101 113 317/3 322/757 342/200 633/280
SEEN-BY: 920/1 5020/1042 5058/104
PATH: 250/1 301/1 229/426