TZUTC: 1100
MSGID: 438.fdn_mbse@3:633/509 2662f1ca
REPLY: 2:250/1@fidonet 61fdb510
PID: Synchronet 3.19a-Linux master/8f79438d2 Apr 24 2021 GCC 8.3.0
TID: SBBSecho 3.14-Linux master/8f79438d2 Apr 24 2021 GCC 8.3.0
COLS: 139
BBSID: ALTERANT
CHRS: CP437 2
NOTE: FSEditor.js v1.104
  Re: Change of prt number for mbse
  By: Vincent Coen to All on Fri Feb 04 2022 11:11 pm

 > This way I can tell the Router to port forward 24554 to pass all traffic
to  the
 > primary and if a poll comes in using 24555 to pass traffic to the Pi.
 >
 > I cannot see how you set up the port in mbse and I think I have looked
every where (unless some one knows otherwise by doing a search
 > of
 > the manual for '24554')  as it looks like 24554 is the standard and can't
be changed - or can it ?

Why dont you tell your router to forward 24555 to Pi:24554?


...ëîåï
--- SBBSecho 3.14-Linux
 * Origin: I'm playing with ANSI+videotex - wanna play too? (3:633/509)
SEEN-BY: 1/123 15/0 18/200 90/1 105/81 106/201 120/340 123/131 129/305
SEEN-BY: 129/330 331 153/7715 226/30 227/114 229/110 206 317 400 424
SEEN-BY: 229/426 428 452 550 664 700 240/5832 266/512 282/1038 292/854
SEEN-BY: 301/1 317/3 320/219 322/757 342/200 396/45 460/58 633/267
SEEN-BY: 633/280 281 412 416 509 640/1384 712/848 770/1
PATH: 633/509 280 229/426