REPLY: 2:250/1@fidonet 6212ca68
MSGID: 1:320/219@fidonet 6213be38
CHRS: CP437 2
TZUTC: -0500
TID: MBSE-FIDO 1.0.8 (GNU/Linux-x86_64)
Hello Vincent!

20 Feb 22 23:09, you wrote to Sean Dennis:

 VC> Thanks found it, now to find out why the system rejects calls using
 VC> telnet or ssh, Again!

Telnet connections are handled through inetd or xinetd normally, depending on 
your distribution.  The SETUP.sh script creates the necessary entries 
automatically based on which is detected when you run it.  The telnet entries 
are disabled by default, so you would need to enable them.

Andrew

--- GoldED+/LNX 1.1.5-b20180707
 * Origin: Phoenix BBS * phoenix.bnbbbs.net (1:320/219)
SEEN-BY: 1/19 123 15/0 16/0 18/200 19/37 90/1 105/81 106/201 120/340
SEEN-BY: 123/130 131 129/305 330 331 153/7715 203/0 218/700 221/0
SEEN-BY: 226/30 227/114 229/110 206 317 400 424 426 428 452 550 664
SEEN-BY: 229/700 240/5832 266/512 282/1038 292/854 301/1 317/3 320/119
SEEN-BY: 320/219 319 322/0 757 342/200 396/45 460/58 633/280 712/848
PATH: 320/219 229/426