REPLY: 1:320/219@fidonet 6213be38
MSGID: 2:250/1@fidonet 6213d389
CHRS: UTF-8 2
TZUTC: 0000
TID: MBSE-FIDO 1.0.8 (Linux-x86_64)
Hello Andrew!

Monday February 21 2022 11:15, you wrote to me:

 > Hello Vincent!

 > 20 Feb 22 23:09, you wrote to Sean Dennis:

 VC>> Thanks found it, now to find out why the system rejects calls
 VC>> using telnet or ssh, Again!

 > Telnet connections are handled through inetd or xinetd normally,
 > depending on your distribution.  The SETUP.sh script creates the
 > necessary entries automatically based on which is detected when you
 > run it.  The telnet entries are disabled by default, so you would need
 > to enable them.

That look correct here is o/p from xinedt.d/mbsebbs

...

# Telnet to the bbs using mblogin, disabled by default.
#
service telnet
{
        disable         = no
        protocol        = tcp
        instances       = 10
        flags           = REUSE
        log_on_failure += USERID
        socket_type     = stream
        user            = root
        server          = /usr/sbin/telnetd
        server_args     = -L /home/mbse/bin/mblogin
        wait            = no
}


Not disabled so should be good !

In /etc/services both telnet and ssh are shown as ports 22 & 23.

Hmm, wonder if it is the modem or router but the router should be passing on
ports 22 and 23.


Vincent

--- Mageia Linux v8 X64/Mbse v1.0.7.24/GoldED+/LNX 1.1.5-b20180707
 * Origin: Air Applewood, The Linux Gateway to the UK & Eire (2:250/1)
SEEN-BY: 1/123 15/0 18/200 25/0 21 90/1 103/705 105/81 106/201 120/340
SEEN-BY: 123/131 129/305 330 331 153/7715 154/10 218/700 221/1 6 226/30
SEEN-BY: 227/114 229/110 206 317 400 424 426 428 452 550 664 700 240/1120
SEEN-BY: 240/5832 250/0 1 2 3 4 5 6 7 8 10 11 21 263/0 266/512 275/1000
SEEN-BY: 280/464 282/1038 292/854 301/1 113 317/3 320/219 322/757
SEEN-BY: 342/200 396/45 460/58 633/280 640/1321 712/848 920/1 3634/12
SEEN-BY: 5020/1042 5058/104
PATH: 250/1 301/1 229/426