REPLY: 1:153/757.0 910414b3
MSGID: 2:250/1@fidonet 6257597d
CHRS: UTF-8 2
TZUTC: 0100
TID: MBSE-FIDO 1.0.8 (Linux-x86_64)
Hello Alan!

Wednesday April 13 2022 14:41, you wrote to me:

 >> I want to set up a second bbs system on a Raspberry pi to handle a
 >> simple-ish service namely for ELIST.

 >> As my main system uses the default of 24554 I have port forwarding
 >> set on the router to the main system but need to do the same for
 >> port 24555 for the Pi.

 > Change the binkp port in /etc/services to 24555 on that machine.

 >> Question how do I change the mbse set up to use this change of port
 >> as I cannot find anywhere where this is defined.

 > I'm not sure if MBSE can be configured to use a different port.

 >> Any one have a clue to finding this and changing it ?

 > Changing the port in /etc/services has worked for me in the past.

Thanks done that as well.


Vincent

--- Mageia Linux v8 X64/Mbse v1.0.8/GoldED+/LNX 1.1.5-b20180707
 * Origin: Air Applewood, The Linux Gateway to the UK & Eire (2:250/1)
SEEN-BY: 1/120 123 15/0 18/0 200 25/0 21 90/1 105/81 106/201 120/340
SEEN-BY: 123/0 25 131 180 200 755 129/305 330 331 135/300 138/146
SEEN-BY: 153/7715 154/10 218/700 222/2 226/30 227/114 229/110 111
SEEN-BY: 229/206 317 400 424 426 428 452 550 664 700 240/1120 250/0
SEEN-BY: 250/1 2 3 4 5 6 7 8 10 11 21 261/38 263/0 266/512 275/100
SEEN-BY: 275/1000 282/1038 292/854 299/6 301/1 317/3 320/219 322/757
SEEN-BY: 342/11 200 396/45 460/58 633/280 640/1321 712/848 3634/0
SEEN-BY: 3634/12 15 27 50 119 5020/1042
PATH: 250/1 3634/12 153/7715 229/426