MSGID: 2:250/1@fidonet 62814c42
CHRS: UTF-8 2
TZUTC: 0100
TID: MBSE-FIDO 1.0.8 (Linux-x86_64)
Hello All!

Is there a way within mbse of setting a specific node address to be totally
ignore just as soon as its address line is received ?

Why, I have a node in Switzerland who polls every minute of all hours and some
time twice at the same time with a bad password.

Now I did set on, every debug setting for almost everything to try and show 
the
password being used but to no avail - but I am sure that there was a setting 
to
get passwords used displayed if the did not match.
Cannot find it now with v1.0.8.

As I gave up on that great idea I have removed the node from my set up but of
course that has not made any difference and is still giving the error code 
121.

It does show in error.log as :

 02-May-2022 17:15:36 mbcico[2192699] Binkp: TCP rcv error, tty status: Error

and this appear every minute :(


Vincent

--- Mageia Linux v8 X64/Mbse v1.0.8/GoldED+/LNX 1.1.5-b20180707
 * Origin: Air Applewood, The Linux Gateway to the UK & Eire (2:250/1)
SEEN-BY: 1/120 123 15/0 18/0 200 25/0 90/1 103/705 105/81 106/201
SEEN-BY: 120/340 123/0 10 25 131 180 200 755 124/5016 129/305 330
SEEN-BY: 129/331 135/300 153/757 7715 154/10 30 40 50 700 203/0 218/700
SEEN-BY: 220/90 221/0 6 222/2 226/18 30 227/114 201 229/110 111 206
SEEN-BY: 229/317 400 424 426 428 452 470 550 664 700 240/1120 5832
SEEN-BY: 250/0 1 2 3 4 5 6 7 8 11 12 263/0 266/512 275/1000 280/464
SEEN-BY: 280/5003 282/1038 292/854 8125 299/6 301/1 317/3 320/219
SEEN-BY: 322/757 341/234 342/200 396/45 423/120 460/58 633/280 712/620
SEEN-BY: 712/848 1321 770/1 2320/105 2452/250 3634/0 12 15 27 50 119
SEEN-BY: 5020/1042
PATH: 250/1 3634/12 154/10 280/464 712/848 229/426