REPLY: 1:320/219@fidonet 62816778
MSGID: 2:250/1@fidonet 62818a9f
CHRS: UTF-8 2
TZUTC: 0100
TID: MBSE-FIDO 1.0.8 (Linux-x86_64)
Hello Andrew!

Sunday May 15 2022 16:43, you wrote to me:


 > Hello Vincent!

 > 15 May 22 19:39, you wrote to all:

 VC>> Is there a way within mbse of setting a specific node address to
 VC>> be totally ignore just as soon as its address line is received ?

 > If they always call from the same IP address, just configure your
 > firewall to reject connections from that IP.

 VC>> Why, I have a node in Switzerland who polls every minute of all
 VC>> hours and some time twice at the same time with a bad password.

 VC>> Now I did set on, every debug setting for almost everything to
 VC>> try and show the password being used but to no avail - but I am
 VC>> sure that there was a setting to get passwords used displayed if
 VC>> the did not match. Cannot find it now with v1.0.8.

 > Try disabling MD5 for that node; otherwise the password is never sent
 > in the clear.

cracked, in 1.14.16 as it is a all setting, not avail for a node via 7.
Thanks,


Vincent

--- Mageia Linux v8 X64/Mbse v1.0.8/GoldED+/LNX 1.1.5-b20180707
 * Origin: Air Applewood, The Linux Gateway to the UK & Eire (2:250/1)
SEEN-BY: 1/120 123 15/0 18/0 200 25/0 90/1 103/705 105/81 106/201
SEEN-BY: 120/340 123/0 10 25 131 180 200 755 124/5016 129/305 330
SEEN-BY: 129/331 135/300 153/757 7715 154/10 30 40 50 700 203/0 218/700
SEEN-BY: 220/90 221/0 6 222/2 226/18 30 227/114 201 229/110 111 206
SEEN-BY: 229/317 400 424 426 428 452 470 550 664 700 240/1120 5832
SEEN-BY: 250/0 1 2 3 4 5 6 7 8 11 12 263/0 266/512 275/1000 280/464
SEEN-BY: 280/5003 282/1038 292/854 8125 299/6 301/1 317/3 320/219
SEEN-BY: 322/757 341/234 342/200 396/45 423/120 460/58 633/267 280
SEEN-BY: 633/281 412 416 509 712/848 1321 770/1 2320/105 2452/250
SEEN-BY: 3634/0 12 15 27 50 119 5020/1042
PATH: 250/1 3634/12 154/10 280/464 633/280 229/426