TZUTC: -0800
MSGID: 8196.mystic@1:103/705 27f207a1
REPLY: 1:229/310 d3b7e86d
PID: Synchronet 3.20a-Linux v320a_dev/48a8573dc Dec  3 2022 GCC 12.2.0
TID: SBBSecho 3.20-Linux v320a_dev/48a8573dc Dec  3 2022 GCC 12.2.0
BBSID: VERT
CHRS: UTF-8 4

Hi Mike,

Did this and now it says "Cannot initialize Python, press a key".
Before that the app was running fine apart from the mismatch error, and that no
imported modules worked.

What on earth is going on?

:/
--- SBBSecho 3.20-Linux
 * Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)
SEEN-BY: 1/19 123 15/0 16/0 19/10 37 80/1 90/1 103/705 105/81 106/201
SEEN-BY: 120/340 123/130 131 124/5016 129/305 142/104 799 153/757
SEEN-BY: 153/7715 154/10 203/0 218/700 221/0 1 6 242 360 226/30 227/114
SEEN-BY: 229/110 111 112 113 114 206 275 317 400 424 426 428 452 470
SEEN-BY: 229/550 664 700 230/0 240/1120 5832 266/512 280/464 5003
SEEN-BY: 282/1038 292/854 8125 301/1 317/3 320/119 219 319 2119 322/0
SEEN-BY: 322/757 325/304 341/66 234 342/200 396/45 423/81 460/58 633/280
SEEN-BY: 712/848
PATH: 103/705 280/464 221/1 320/219 229/426