TID: Mystic BBS 1.12 A48
MSGID: 1:134/303 0022ed42
REPLY: <7a6f706f-ce14-4cb2-bffb-960aad0da9dbn@googlegroups.com> 60f2bfc5
TZUTC: -0700
I'm not certain this is related but I've noticed similar issues with Python 3
in Mystic. Particularly when my script is making any sort of external http(s)
connection. 

A while back I was writing my own "This Day in History" type script.
Everything worked fine until the script finished and then the connection would
get dropped from the BBS. In the end it was easier to make cron job that
downloaded the history to a file and then open it via open().

More recently while trying to use feedparser to read RSS I've noticed the same
behavior: once the script finished, my session gets disconnected.

I haven't had time to dig into it more but I suspect if I make a cronjob to
save the feed as an XML file and then open() the file and work with it, I
suspect it will work. It's not the cleanest way and perhaps not a final
solution it's a possible work-around for the time being.

blade

... Error, no Keyboard - Press F1 to Continue.

--- Mystic BBS v1.12 A48 (Raspberry Pi/32)
 * Origin: CaNerDUH BBS (1:134/303)
SEEN-BY: 1/123 15/0 90/1 105/81 106/201 120/340 123/131 129/305 134/0
SEEN-BY: 134/100 101 303 153/143 757 7083 7715 154/10 218/700 840
SEEN-BY: 221/6 226/30 227/114 229/110 111 112 113 114 206 275 307
SEEN-BY: 229/317 400 424 426 428 452 470 550 664 700 266/512 280/464
SEEN-BY: 282/1038 292/854 317/3 320/219 322/757 342/200 396/45 460/58
SEEN-BY: 633/280 712/848 770/1 3634/12
PATH: 134/303 101 100 153/757 221/6 229/664 426