tn.wpusa.dynip.com@returns.groups.yahoo.com
n.wpusa.dynip.com@returns.groups.yahoo.com
mail.sp1.yahoo.com) (66.163.168.136)
19 Apr 2011 15:48:27 -0000
19 Apr 2011 15:48:27 -0000
(207.69.195.61)
helo=slamain)
are-owner@yahoogroups.com
In <4DAD45A3.3000707@ecomstation.it>, on 04/19/11
   at 10:19 AM, Massimo  said:

Hi Massimo,

>i just installed an HP Proliant ML330 G3 with eCS 2.0GA,

OK.  As usual, still too few details.

At a minumum you are going to need an updated os2krnl.  There's a defect
in the kernel that shipped with eCS2.0 GA that caused the Process Dump
Facility to trap the kernel.  Since this is a new installation of eCS
2.0GA, I recommend that you submit a support ticket at

 http://www.ecomstation.com/support/tickets/ticket_create.php?DepartmentID=1

to get the process started.

>If i try to use the server in SMP mode it start the hell,
>ring 0 traps, hard-hangs etcc...

>The server has some "trivial" settings in the bios e.g.
>OS type, MPS table (auto, full apic table, disabled, full mapped table),
>optimize speed for I/O or for memory that could do nasty things about me
>:)

IIRC, there are a number of folks on the Apache/2 list using Proliant
servers.  I recommend you post to the list and ask for tuning tips.

>It trap if i use OS2APIC or even ACPI from ecs2.0ga....

>Any idea?
>Any experience or suggestions?

My only comment at the moment is to repeat what I have said before in
recent e-mails - a general description of a failure will generally get you
a general description of possible solutions.

Steven

-- 
----------------------------------------------------------------------
"Steven Levine"   eCS/Warp/DIY etc.
www.scoug.com www.ecomstation.com
----------------------------------------------------------------------



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/os2hardware/join
    (Yahoo! ID required)

<*> To change settings via email:
    os2hardware-digest@yahoogroups.com 
    os2hardware-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/


---
 * Origin: Waldo's Place USA Internet Gateway (1:3634/1000)