Hi mark,

On 2014-02-03 19:01:51, you wrote to me:

 ml>> benny is not the pascal echo moderator... gert is ;)

 WvV>> I know, but Benny is the RC. Gert can't move his node number to Z1
 WvV>> without Benny's help... ;)

 ml> sure he can but that's not a topic for this area...

Yeah, of course, but than he would get a totally different nodenumber. But we
shouldn't look too much into the technicalities of a Zone change, it was just
my "humorous" way of pointing Gert at a mistake in his configuration.

 ml> in looking back at the original post, i would have to say that there
 ml> is a misconfiguration on gert's machine...

Of course there is. There were also 1 or 2 minor changes in the text of the
moderator rules, so he obviously did some thinkering with his config...

 ml> if not that, then something between his system and others' (our's) is
 ml> broken... the original post showed zone1 for all the places where it
 ml> should have shown zone2... the question is where the problem lays...
 ml> at the origin or somewhere after... we won't even mention all the
 ml> systems passing the mail from a non existent node

The path from me to him wasn't that long:

@PATH: 230/150 261/38 712/848 280/464

I very much doubt Janis's or Scotts system caused this, because than we should
see much more of those mistakes. (Although I wouldn't rule out that it's
Janis's attempt at world domination ;)). And it arrived here in that state, so
I can rule out my system...

Bye, Wilfred.

--- FMail-W32-1.67.0.46-B20140112
 * Origin: Amiga Offline BBS Lisse (2:280/464)