JK>MSGID: 2:362/6 0017b3a2
JK>-> Here's my SIO config for using with PCBoard:

JK>Thanks.

JK>-> device=c:\sio\sio.sys [5,INTERNET:1F8,NONE:7]
JK>-> [6,INTERNET:1E8,NONE:7] [7,INTERNET:100,NONE:7]
JK>-> [8,INTERNET:108,NONE:7]

JK>-> I don't use the first 4 comm ports and IRQ 7 is shared.

JK>Are your PCBoard ports configured for FOSSIL, or COM port?  I could
JK>not tell from the SIO 1.60d docs if the VX00 FOSSIL works with
JK>vmodem, or if you have to use COM ports for FOSSIL.

in PCBsetup the nodes are set to OS/2 com ports (matching the com port 
numbers above 5,6,7,8 etc..) since I am running the OS/2 version of 
PCboard.  Other than setting this and locking the com port to 57600 
under PCBsetup, that's about it.


Jeff

--- PCBoard (R) v15.3/M 10
 * Origin:  (1:226/600)