MSGID: 2:310/31.6 b94af520
CHRS: CP866 2
TZUTC: 0200
REPLY: 2:467/888 630238da
//Hello Ruslan,//

on *21.08.22* at *13:51:46* You wrote in Area *POINTS*
to *Tim Schattkowsky* about *"WinPoint Version 409.0 (A Bugfix Release) is
available"*.

 RS>   I install new ver. 411 but some problem, i not see messages in echos,
 RS> also window not close,
 RS> Abort buttom also dont work... https://prnt.sc/s2zPopr-PKgi

Seems the tosser hangs while importing f77c7e00.pkt (see window title). Have
not seen this before.

The way the WP tosser works, it first completely reads the messages from all
available packets into memory before starting to write any messages to disk.
This is for performance reasons. However, if the tosser hangs while reading a
packet, it never writes anything to the disk and also cannot respond to the
abort button. This seems to happen in your case.

I suspect it is always the same packet causing this problem for you. My first
suggestion is to move the problematic packet fil(e) (here f77c7e00.pkt) before
selecting Fidonet->Tosser->Import (menuitem) from the inbound directory
(Fidonet->Show Inbound Directory in Explorer) to a different location. After
that, the import should finish. 

*Please keep the problematic file(s) so I can later check it/them to find the
problem*.  

Also, please let me know if this helped.

Regards,
Tim

--- WinPoint 411.1
 * Origin: Original WinPoint Origin! (2:310/31.6)
SEEN-BY: 1/19 123 15/0 16/0 19/37 90/1 105/81 106/201 120/340 123/130
SEEN-BY: 123/131 124/5016 129/305 331 153/757 7715 154/10 203/0 218/700
SEEN-BY: 221/0 227/114 229/111 112 113 206 317 400 424 426 428 470
SEEN-BY: 229/664 700 240/2100 5234 5411 5824 5832 5853 5890 266/512
SEEN-BY: 280/464 5003 282/1038 292/854 8125 301/1 310/31 317/3 320/119
SEEN-BY: 320/219 319 322/0 757 326/101 341/66 234 342/200 396/45 423/120
SEEN-BY: 460/58 633/280 712/848 770/1 2432/390 2452/250 2454/119
PATH: 310/31 280/464 240/5832 320/219 229/426