TZUTC: -0700
MSGID: 26.fidonet_rasuppor@1:218/840 259677e8
PID: Synchronet 3.19a-Linux master/dc4a5f8af Sep  2 2021 GCC 9.3.0
TID: SBBSecho 3.14-Linux master/dc4a5f8af Sep  2 2021 GCC 9.3.0
BBSID: HOVAL
CHRS: ASCII 1
NOTE: SlyEdit 1.74 (2021-01-23) (DCT style)
I am thinking of setting up a D'bridge/RA board and wondered what you guys
were using to tie these 2 together. I have OS/2 4.52 running DB now from a
command line. In the 90's I ran FrontDoor and RA from a batchfile. I would
load FD and then when a BBS call came in FD would exit to an errorlevel and RA
would load. Is that the prefered way to run DB and RA? I have tried loading RA
from a batch file but the "modem" is too slow to connect properly using SIO. A
lot of times it will show "ring" and never connect reliable. Also noticed that
when it does connect that the up/down zmodem connections would error out.
Anyone else here running OS/2?
Thanks!
--- SBBSecho 3.14-Linux
 * Origin: Halls of Valhalla -:- hovalbbs.com:2333 (1:218/840)
SEEN-BY: 1/123 14/0 90/1 103/705 120/340 123/131 124/5016 129/305
SEEN-BY: 153/250 757 154/10 203/0 218/700 840 220/70 221/0 6 226/17
SEEN-BY: 226/30 227/114 702 229/424 426 428 550 664 700 1017 240/1120
SEEN-BY: 240/5138 5411 5824 5832 5853 249/1 206 317 267/800 280/464
SEEN-BY: 280/5003 282/1038 292/854 301/1 310/31 317/3 322/757 340/1000
SEEN-BY: 342/200 396/45 423/120 633/280 712/848 770/1 100 330 340
SEEN-BY: 772/220 230 2432/390 2452/250 2454/119
PATH: 218/840 770/1 280/464 240/5832 229/426