INTL 3:770/1 3:770/3
REPLYADDR tnp@invalid.invalid
REPLYTO 3:770/3.0 UUCP
MSGID:  3c4bdee5
REPLY:  80702e51
PID: SoupGate-Win32 v1.05
On 30/11/2024 09:03, Chris Green wrote:
> Chris Townley  wrote:
>> On 29/11/2024 22:49, Chris Green wrote:
>>> I'm currently running Bullseye on a Raspberry Pi Model B Plus Rev 1.2
>>> but I'd quite like to move to Bookworm if I can.
>>>
>>> It's headless and has a 'lite' installation, it's not doing very much
>>> that pushes its processing power so should be OK from that point of
>>> view.
>>>
>>> I can't quite remember why I installed Bullseye rather than Bookworm,
>>> there must have been some sort of reason but now I can't really see
>>> what that might have been! :-)
>>>
>>
>> There is, of course no supported way to move from Bullseye to bookworm,
>> other than full reinstall.
>>
> That's not a problem, a clean install followed by restoring my /home
> will be just about all that's needed.  I also have an 'added' list of
> the packages I have installed in addition to the base system.  There's
> only half a dozen or so.
>
Yes. I write a file called 'system.txt' to document everything I did to
get from fresh install to where I am now.

It is almost a runnable script :-)

--
    "Fanaticism consists in redoubling your effort when you have
forgotten your aim."

  George Santayana

--- SoupGate-Win32 v1.05
 * Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)
SEEN-BY: 10/0 1 103/705 105/81 106/201 124/5016 128/187 129/305 153/757
SEEN-BY: 153/7715 218/0 1 601 700 840 870 930 220/70 221/1 6 360 226/17
SEEN-BY: 226/30 100 227/114 229/110 111 114 200 206 300 317 400 426
SEEN-BY: 229/428 470 550 616 664 700 240/1120 266/512 267/800 282/1038
SEEN-BY: 291/111 292/854 301/1 113 812 310/31 320/219 322/757 335/364
SEEN-BY: 341/66 342/200 396/45 460/58 633/280 712/848 770/1 3 100
SEEN-BY: 770/330 340 772/210 220 230 902/26 5020/400 1042 5075/35
PATH: 770/3 1 218/840 221/6 301/1 218/700 229/426