INTL 3:770/1 3:770/3
REPLYADDR sb.nospam@belgacom.net
REPLYTO 3:770/3.0 UUCP
MSGID:  1f5d3859
REPLY:  381efe6d
PID: SoupGate-Win32 v1.05
CHRS: LATIN-1 2
On 03 Dec 2024 10:13:01 +0000 (GMT), Theo wrote:

> I'm guessing that the blue pin is actually the speed control PWM, and the
> green is to report spin speed back to the Pi.  If you don't care about that
> you don't need it.
>
> If you're unsure, you can just wire red and black and ignore the other two
> wires - the fan should spin at full speed and you won't be able to sense the
> spin speed, but maybe that's ok.

Tnx for the follow-up. According to the shop I could just snip the green
wire, so I've done that. I've set it to run at 60°C and the fan's not
turning (CPU temperature is 48°C).

--
s|b

--- SoupGate-Win32 v1.05
 * Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)
SEEN-BY: 19/38 105/81 106/201 128/187 129/305 153/757 7715 218/700
SEEN-BY: 218/840 220/70 226/17 30 100 227/114 229/110 111 114 200
SEEN-BY: 229/206 300 317 400 426 428 470 550 616 664 700 705 266/512
SEEN-BY: 267/800 282/1038 291/111 292/854 310/31 320/219 322/757 342/200
SEEN-BY: 396/45 460/58 633/280 281 412 418 420 509 2744 712/848 770/1
SEEN-BY: 770/3 100 330 340 772/210 220 230 902/26 5020/400 5075/35
PATH: 770/3 1 633/280 229/426