INTL 3:770/1 3:770/3
REPLYADDR sb.nospam@belgacom.net
REPLYTO 3:770/3.0 UUCP
MSGID:  1f5d3859
REPLY:  381efe6d
PID: SoupGate-Win32 v1.05
CHRS: LATIN-1 2
On 03 Dec 2024 10:13:01 +0000 (GMT), Theo wrote:

> I'm guessing that the blue pin is actually the speed control PWM, and the
> green is to report spin speed back to the Pi.  If you don't care about that
> you don't need it.
>
> If you're unsure, you can just wire red and black and ignore the other two
> wires - the fan should spin at full speed and you won't be able to sense the
> spin speed, but maybe that's ok.

Tnx for the follow-up. According to the shop I could just snip the green
wire, so I've done that. I've set it to run at 60°C and the fan's not
turning (CPU temperature is 48°C).

--
s|b

--- SoupGate-Win32 v1.05
 * Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)
SEEN-BY: 4/0 19/10 88/0 90/0 105/81 106/201 128/187 129/305 153/757
SEEN-BY: 153/7715 218/700 840 220/70 221/1 6 360 226/17 30 100 227/114
SEEN-BY: 229/110 111 114 200 206 300 317 400 426 428 470 550 616 664
SEEN-BY: 229/700 705 266/512 267/800 282/1038 291/111 292/854 301/1
SEEN-BY: 310/31 320/219 322/757 335/364 341/66 342/200 396/45 460/58
SEEN-BY: 633/280 712/848 770/1 3 100 330 340 772/210 220 230 880/1
SEEN-BY: 900/0 102 106 902/0 6 19 26 905/0 930/1 5020/400 5075/35
PATH: 770/3 1 218/840 221/6 341/66 902/26 229/426