INTL 3:770/1 3:770/3
REPLYADDR news@druck.org.uk
REPLYTO 3:770/3.0 UUCP
MSGID:  503f19e5
REPLY: 2:280/2060.0 6793299a
PID: SoupGate-Win32 v1.05
On 23/01/2025 17:42, Dennis Slagers wrote:
> Maybe this is useful
>
> https://aroundmyroom.com/2018/07/28/update-boot-from-usb-with-hp-microserver-
> gen8-and-openmediavault/
>
> and gives you hints
>
> I own some HP Gen8 Microservers where you cannot boot (depends on how you
want
> to use the HDD's) from the ODD port, but you can use it to have a disk
> connected to it for further use
>
> So the trick is to boot from your SD and than tell Grub that it has to use
that
> device for the rest
> so the USB disk (in my instance) was only getting start and than go further
to
> the SATA
>
> But it should not matter if that is SD or USB whatever..

This is completely inappropriate for a Raspberry Pi, which does not boot
like a PC using grub.

> If you start chatgpt.com  ..
> and ask a question like
>
> how to start from an SD card (initial boot) on a raspberry pi and than the
rest
> through grub starting to the USB ?
>
> you get also an answer you might be able to use

More bad advice.

See later in this thread for the actual answer.

---druck

--- SoupGate-Win32 v1.05
 * Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)
SEEN-BY: 4/0 19/10 88/0 90/0 105/81 106/201 128/187 129/305 153/757
SEEN-BY: 153/7715 154/110 218/700 840 220/70 221/1 6 360 226/17 30
SEEN-BY: 226/100 227/114 229/110 111 114 200 206 275 300 317 400 426
SEEN-BY: 229/428 470 550 616 664 700 705 266/512 267/800 291/111 292/854
SEEN-BY: 301/1 310/31 320/219 322/757 335/364 341/66 342/200 396/45
SEEN-BY: 460/58 633/280 712/848 770/1 3 100 330 340 772/210 220 230
SEEN-BY: 880/1 900/0 102 106 902/0 19 26 905/0 930/1 2320/105 5020/400
SEEN-BY: 5075/35
PATH: 770/3 1 218/840 221/6 341/66 902/26 229/426