INTL 3:770/1 3:770/3
REPLYADDR bulleid@ffoil.org.uk
REPLYTO 3:770/3.0 UUCP
MSGID: cdacb1fd
REPLY: 1ad99c4d
PID: SoupGate-Win32 v1.05
CHRS: LATIN-1 2
In message , Pancho
writes
>> OP here with a follow up.
>> After some ruminating, I decided to give the Local Bytes Smart plug
>>a try. I've got it happily working now, although I did have to install
>>(yet) another Pi to act as the control hub (Home Assistant if anyone
>>is interested). I'm now waiting for a fresh delivery of a Pi3 to
>>install as a WiFi AP (the Pis in the locality are all Pi2).
>> One useful feature of the Local Bytes offering is that you can see
>>to power being consumed by the device it is controlling (although mine
>>suggests that I'm on 245V), but I've yet to work out how to access
>>that via a command line, rather than web interface.
>> Thanks again for the suggestions.
>> Adrian
>
>Did you opt for ESPHome or Tasmota firmware?
>
Tasmota. No particular reason.
>I use Tasmota, but I use Domoticz rather than Home Assistant. From what
>I read ESPHome is tailored for Home Assistant and uses REST API rather
>than MMQT like Tasmota.
>
>A Pi4 can handle a lot of different services on the same machine,
>installed in Docker Containers. So you don't necessarily need lots of
>Pis. If the Pi4 isn't enough, there are more powerful Pis.
>
Machine power isn't likely to be an issue. HA suggest a Pi4 as a
suitable host, but I didn't have a spare one, so I installed it on a
Pi3. However, as I need to set up a WiFi Access point, and that needs
>=Pi3 I had to go shopping. I hope that for what I'm going to be using
it for (apart from the AP), a Pi3 will be more than enough.
So far as I've been able to find out, HA is only installed as an image
on the SD card (using the RPI Imager), rather than manually installed on
an existing Pi image (e.g. apt install ...), so that means that the Pi
can only be used for what HA allows you to do. Therefore, one downside
(for me) with HA is that I don't seem to be able to gain SSH access to
the PI. I can access it via the web interface, and I can install a ZSH
shell on it, but that is in (I think) a Docker Container. What I would
like to be able to do, which I can with my other Pis, is to run regular
health check stuff, CPU temp, free memory, free card space that sort of
stuff. I can do that from the Docker Container, but I can't set up a
cron job to do it, and I haven't even tried getting it to email me a
daily summary.
A quick look at Domoticz suggests that it will allow me to do my own
monitoring, so that could be worth looking at in due course.
Thanks for the follow up.
Adrian
--
To Reply :
replace "bulleid" with "adrian" - all mail to bulleid is rejected
Sorry for the rigmarole, If I want spam, I'll go to the shops
Every time someone says "I don't believe in trolls", another one dies.
--- SoupGate-Win32 v1.05
* Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)
SEEN-BY: 10/0 1 19/10 103/705 105/81 106/201 124/5016 128/187 129/305
SEEN-BY: 153/757 7715 154/110 218/0 1 601 700 840 220/70 221/1 6 360
SEEN-BY: 226/17 30 100 227/114 229/110 111 114 200 206 275 300 317
SEEN-BY: 229/400 426 428 470 550 616 664 700 705 240/1120 266/512
SEEN-BY: 267/800 291/111 292/854 301/1 113 812 310/31 320/219 322/757
SEEN-BY: 335/364 341/66 342/200 396/45 460/58 633/280 712/848 770/1
SEEN-BY: 770/3 100 330 340 772/210 220 230 902/26 2320/105 5020/400
SEEN-BY: 5020/1042 5075/35
PATH: 770/3 1 218/840 221/6 301/1 218/700 229/426
|
