MSGID:  a883e8d7
REPLY: <10jdt2m$22a2d$1@dont-email.me> 6947f92e
PID: PyGate 1.5.2
TID: PyGate/Linux 1.5.2
CHRS: ASCII 1
TZUTC: 0000
REPLYADDR invalid@invalid.invalid
REPLYTO 3:633/10 UUCP
Pancho  writes:
> Richard Kettlewell wrote:
>> https://www.greenend.org.uk/rjk/tech/nat.html has a worked example.
>
> Curiously  is an
> example of a website that fails to load when I use IPv6 but works fine
> under IPv4
>
> curl -4 https://www.greenend.org.uk/rjk/tech/nat.html
> works fine
> .
> curl -6 https://www.greenend.org.uk/rjk/tech/nat.html
> times out.

It works for me from a couple of locations (one with native IPv6 and
the other via a Hurricance Electric tunnel). traceroute -6 might reveal
where your problem is.

> Last thing I receive in IPv6 pcap from Greenend says
> [TCP Previous segment not captured]

AFAICT that just means you started tracing part way through a session.

-- 
https://www.greenend.org.uk/rjk/

--- PyGate Linux v1.5.2
 * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
SEEN-BY: 105/81 106/201 128/187 129/14 305 153/7715 154/110 218/700
SEEN-BY: 226/30 227/114 229/110 112 134 200 206 275 300 317 400 426
SEEN-BY: 229/428 470 616 664 700 705 266/512 291/111 292/854 320/219
SEEN-BY: 322/757 342/200 396/45 460/58 633/10 280 414 418 420 422
SEEN-BY: 633/509 2744 712/848 770/1 902/26 2320/105 5020/400 5075/35
PATH: 633/10 280 229/426