From: Snag_one@msn.com   
      
      I did end up using the new carb , thought a first I wasn't going to   
   need it but ... I did not end up using the new unloader valve , it   
   stalled the motor when I let off the trigger - probably adjusted for too   
   high a relief pressure . The low pressure relief is disabled , I have to   
   hold the trigger open for it to start . I'm going to see if I can source   
   the correct parts , apparently a generic spring and ball ain't gonna cut   
   it . I did change the relief pressure setting on the old unloader ,   
   backed the screw off one full turn and now the original unloader is   
   functioning correctly . It too was stalling the motor when I released   
   the trigger .   
      Well , now I get to test the detergent supply and if that works I'm   
   going to wash the car - but not today , we're still having afternoon   
   thunderstorms . Be kinda like having my own little car wash out here in   
   the woods .   
   --   
   Snag   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)