From: none@none.com99   
      
   On 10/31/2024 10:48 AM, Bob La Londe wrote:   
   > On 10/31/2024 4:39 AM, Jim Wilkins wrote:   
   >> "Bob La Londe"  wrote in message news:vfuc8v$2ap2c$1@dont-email.me...   
   >>   
   >> ...   
   >> The thing that excites me most about it (Onefinity Elite Foreman) is the   
   >> Masso G3 Touch controller it comes with. ...   
   >> Bob La Londe   
   >> ------------------------------   
   >> I began designing machine control panels with paper drawings to be   
   >> made on a shear, brake and Strippit punch. CAD/CAM and plasma cutting   
   >> is quite an advance but I must say the old way was easy to learn and   
   >> worked pretty well. I was earning a living with just a pencil.   
   >>   
   >> Learning the old manual methods has been useful when I needed to   
   >> modify existing equipment that was too awkward or flexible to do on a   
   >> machine.   
   >>   
   >> I also designed relay ladder logic for actual relays, before PLCs   
   >> arrived. I began circuit board design with black tape or a laundry   
   >> marker and advanced through computerized design and simulation as they   
   >> developed. The electronics I learned in the Army used individual   
   >> transistors, then I closely followed the growth progress of ICs   
   >> through FPGAs that could self-configure to match a CAD schematic. The   
   >> computer revolution has been interesting to observe and participate in.   
   >>   
   >   
   >   
   > First off I have "built up" a couple CNC control systems.  Designed   
   > might be a strong word, but assembled from assorted "black boxes" would   
   > not.  The thing is the Masso G3 control does "almost" everything in one   
   > finished unit for not much more than I could buy the parts, and it   
   > appears to be code compatible with what I am already using so the post   
   > processor would need little or no modification.  Yes I have modified the   
   > post processors for all of my different machines.  Most are just minor   
   > tweaks.  Actually I rewrote the macros more than modified the post on   
   > the Mach controlled machines, so except for physical capability the code   
   > is cross compatible on all of those.   
   >   
   > Well if I was cheap I could build a controller a lot cheaper, but I'm   
   > tired of tweaking machines for weeks to get them to run right.   
   >   
   >   
      
   I was warned to expect 3-4 weeks to ship as they build machines to   
   order.  I got notice this morning my machine is shipping today.  I guess   
   I'll be desperately be trying to build a base and table for it in the   
   next couple days before it arrives.   
      
      
      
   --   
   Bob La Londe   
   CNC Molds N Stuff   
      
   --   
   This email has been checked for viruses by AVG antivirus software.   
   www.avg.com   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)