From: none@none.com99   
      
   On 11/12/2024 2:52 PM, Snag wrote:   
   > On 11/12/2024 3:02 PM, Bob La Londe wrote:   
   >> On 11/11/2024 8:51 PM, Jim Wilkins wrote:   
   >>> "Clare Snyder"  wrote in message   
   >>> news:d5j5jjh9l75v95jofkrde2b2r8o7lr2bfr@4ax.com...   
   >>>   
   >>> toobad that willys is so far away!!   
   >>>>   
   >>>> --   
   >>>> Bob La Londe   
   >>>> CNC Molds N Stuff   
   >>> --------------------------------------   
   >>> The M151 Jeeps we had in Germany were not good on the roads there.   
   >>> They couldn't keep up on the Autobahn and the winding back roads that   
   >>> BMWs were built for tempted drivers to exceed their cornering limits.   
   >>> My VW could easily handle the unpaved forest fire trails where we set   
   >>> up field exercise sites.   
   >>>   
   >>   
   >> When my dad first got that old Willys ready to go for a first off road   
   >> adventure we headed off across the sand dunes.  I thought it was going   
   >> just fine, but he said he didn't feel like it was performing properly.   
   >> When we got back to the store and pulled around to the back to the   
   >> shop he hopped out to take a look.  Then he realized he hadn't engaged   
   >> the hubs.  LOL.   
   >>   
   >> Probably, its biggest real world use for us was tracking people lost   
   >> in the desert.  Now I can track (to a limited extent) looking at the   
   >> window of my truck, but I've always been better able to track on the   
   >> ground. Back then I hadn't really learned to track.  Not well anyway.   
   >> We'd put that old GPV in first gear and hop out.  As long as the   
   >> terrain wasn't extremely off camber or a crazy grade it would easily   
   >> keep going in the direction it was last pointed.  We could spread out,   
   >> cut sign, walk back to the Jeep for lunch or a drink of water, or to   
   >> change course as needed.  Seems like a little thing but it made a   
   >> several hour to all day rescue tolerable.   
   >>   
   >> The short wheel base and front and rear end clearance was fantastic   
   >> for crossing all but the worst washouts, and it would climb some   
   >> pretty incredible grades just idling along with somebody at the   
   >> wheel.  Sand was not even an issue.   
   >>   
   >> High speed cornering?  Um-no.  Lots of high clearance vehicles   
   >> struggle with that.  Even some you might not think.  Flat out on the   
   >> Autobahn? You are kidding right?  How much do you expect out of a flat   
   >> head four? Were you guys raiding the clinic and feeding it nitrous?   
   >> Even then... Um-no.  LOL   
   >>   
   >> FYI:  That old '42 had a top speed in the high 50s.  Maybe low 60s   
   >> (but I doubt it), but its got a torque ratio at idle that's insane.   
   >> Its a utility vehicle.  By today's standards just a basic 4x4 side by   
   >> side with a bed to haul some stuff.   
   >>   
   >> P.S.  I should say I can track in the desert.  Not so much in the   
   >> woods.   It depends.   
   >>   
   >>   
   >>   
   >   
   >   Dad had a '57 Jeep pickup , he swapped out the original flathead six   
   > for a Tornado 230 overhead cam six . Weren't much for top end but it   
   > sure could climb ! Used to really piss of the guys with their hopped up   
   > big tire hot rod Chevy's and Fords . Dad would set the throttle at about   
   > 1500-1600 RPM and drop it in low/low/4 and just walk up the hills those   
   > boys just spun out on . My brother "gave it away to a friend" after Dad   
   > died .   
      
   Yeah, my dad was in love with that Jeep, but its been parked a long   
   time.  I am sure he would rather I fixed it backup again, but original   
   parts are a lot harder to find than they were back in mid 70s, and the   
   junk man my dad bought some of those early GOV parts from died a few   
   years ago too.  His son has been liquidating everything and just wants   
   the land cleared.  Any old GPV parts are long gone, and he's one of   
   those guys that's impossible to get a price from, because every time you   
   agree he changes the price.   
      
   I might ask my son if he would like me to save it for him, but my son   
   really has no connection with it.   
      
   Now that Bronco... first time my dad refreshed that motor he installed   
   what he called a 1/4 race cam.  It loped and would jump like you kicked   
   it with the spurs if you bumped the throttle just a little hard.  Next   
   time around he went with a much more sensible RV cam (long duration as   
   opposed to high lift) that developed real world torque.  If I bore and   
   stroke it that's my goal.  Sure it will develop more horsepower, but in   
   the mid range where its actually useful off the track.  LOL.  Probably   
   have to get rid of the Holley 650 and go with a throttle body to match   
   the bigger volume.   
      
      
      
   --   
   Bob La Londe   
   CNC Molds N Stuff   
      
   --   
   This email has been checked for viruses by AVG antivirus software.   
   www.avg.com   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)