From: Snag_one@msn.com   
      
   Mounting a drill chuck in the lathe came up , so I put one of mine in   
   the lathe . My spindle is 3MT and the chuck tang is 2MT so an adapter   
   sleeve was used . This is just "a chuck" , nothing special . Runout at   
   the chuck was .003 TIR , at 12 inches from the chuck it was .012" . The   
   rod stock I used was a piece of 1/2" O1 drill rod . The rod is over 24"   
   long , but I did not consider sag to be a factor in the measurement I   
   was doing .   
   --   
   Snag   
   We live in a time where intelligent people   
   are being silenced so that   
   stupid people won't be offended.   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)