From: none@none.com99   
      
   On 5/26/2025 5:23 PM, Clare Snyder wrote:   
   > On Mon, 26 May 2025 13:42:08 -0700, Bob La Londe    
   > wrote:   
   >   
   >> On 5/25/2025 3:43 PM, Snag wrote:   
   >>> On 5/25/2025 5:24 PM, Bob La Londe wrote:   
   >>>> On 5/25/2025 2:40 PM, Snag wrote:   
   >>>>> On 5/25/2025 3:30 PM, Bob La Londe wrote:   
   >>>>>> Quick Easy Vise Hold Down Clamps (video)   
   >>>>>> https://rumble.com/v6tv2qr-quick-easy-vise-hold-down-clamp.html?   
   >>>>>> mref=1sqt4y&mc=42lue   
   >>>>>>   
   >>>>>>   
   >>>>>   
   >>>>> Now I want to make a set for my screwless vise . It's not as big as   
   >>>>> yours ... I considered thinning the noses of a couple of my clamp   
   >>>>> bars but this is much more elegant .   
   >>>>>     Gotta finish the gas check punch set first . Started one of mild   
   >>>>> steel but decided to use O1 instead . Because I remembered I have some .   
   >>>>   
   >>>>   
   >>>> I have a bunch of those imports screwless vises.  I kind of think of   
   >>>> them as consumables, but they do cost a lot more than they used to.   
   >>>>   
   >>>>   
   >>>   
   >>>     Mine's a shop made 2 1/2" made from mystery steel . Realized when I   
   >>> was about 75% complete the plans called for aluminum .   
   >>   
   >>   
   >> Here is that weird aluminum vise I was talking about.   
   >>   
   >> There is a lot in that picture.   
   >>   
   >> The DeWalt radio is bluetooth linked to the cell phone in the vise.   
   >> Yeah, I use the vise as a "camera" mount sometimes when I am working on   
   >> that bench.   
   >>   
   >> To the left are the old vise hold downs for that screwless vise.  I used   
   >> them for a number of years.  Still have a couple more screwless vises   
   >> using those old pin bridge mounts I want to eliminate.   
   >>   
   >> Oh, that reminds me.  I knocked off that blue tap and die case.  I need   
   >> to go pick them all up and put them back in the case.  Low grade   
   >> Lowes/Kobalt stuff, but its the set I toss in the truck when I go to   
   >> somebody else's place to help them out.   
   >>   
   >> Right now I am testing out the radio to see how long it will play on a   
   >> 3AH 20V tool battery.  Almost 4 hours so far.  Last time I checked the   
   >> charge indicator it still indicated full charge.   
   >>   
   >> --   
   >> Bob La Londe   
   >> CNC Molds N Stuff\   
   > \\   
   > You should expect over 40 hours for sure. Likely well over 100 at low   
   > volume. Less than1/2 watts power. You have 60 watt hours available.   
   > At full volime of about 2-5 watts you should still see over 24 hours   
      
   Getting close to 7.5 hours now.  The first few hours were kind of a   
   chore to hear.  It sounded really flat.  When I turned up the base and   
   the treble it started to sound decent.  Not a lot of EQ adjustment on   
   this thing, but there is enough to make it tolerable.   
      
   Been busy all day in the shop, so its just been back ground noise.   
      
      
   --   
   Bob La Londe   
   CNC Molds N Stuff   
      
   --   
   This email has been checked for viruses by AVG antivirus software.   
   www.avg.com   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)