From: Snag_one@msn.com   
      
      I decided just for giggles to do a compression test on the motor I   
   just pulled from my log splitter . Got around 50 PSI after about 6 pulls   
   on the starter rope . That may be a good number if this motor has a   
   compression relief device for easy starting . I haven't checked yet but   
   plan to .   
      And the new motor is doing just fine , hardly burps when loaded with   
   a big log . What's a reasonable time to run the break-in oil ? I've got   
   about 2.5-3 hours run time so far , varied RPMs and load and a couple   
   minutes at idle before shut down . I'm thinking around 5 hours , 10   
   seems like a bit too long .   
   --   
   Snag   
   We live in a time where intelligent people   
   are being silenced so that   
   stupid people won't be offended.   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)