From: muratlanne@gmail.com   
      
   "Snag"  wrote in message news:10dlugu$8b2f$1@dont-email.me...   
      
   On 10/26/2025 1:48 PM, Jim Wilkins wrote:   
   > Will a chainsaw file fit through the hole?   
      
       The top half of the hole yes . The actual nozzle where the lead   
   comes out no . Won't quite pass a 6d box nail .   
   -------------------------   
   I assumed you wouldn't have a set of jewelers' needle files or rifflers, the   
   chainsaw file is similar and common.   
      
   Maybe you could chisel out the crud with a pin punch ground flat with sharp   
   edges, which doesn't ruin it as a punch. A broken tap with the end ground at   
   an angle and held in the pin vise might work as a gouge chisel. The   
   half-round shape is useful enough to be commercially produced.   
   https://www.amazon.com/Mayhew-10502MAY-4-Inch-Round-Chisel/dp/B0015S8S00?   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)