From: Snag_one@msn.com   
      
   On 2/18/2026 7:12 PM, Jim Wilkins wrote:   
   > "Snag"  wrote in message news:10n5n9s$34b1t$1@dont-email.me...   
   >   
   > On 2/18/2026 4:56 PM, Jim Wilkins wrote:   
   >>   
   >>  ... Baldor clone ...   
   >   
   >   I was talking about the block/collet holder I made to hold end mills   
   > to sharpen the ends . I have some kind of bonded grinding disc that was   
   > meant for sharpening circular saw blades - I don't know what that stuff   
   > is but it cut the diamond point that I tried to true it with .   
   > Snag   
   >   
   > ------------------------------   
   > CBN?   
   >   
   > I do remember them, left and right handed. I made an adapter for mine to   
   > hold S&D drill bit shanks centered in the 5C collet to be sharpened at   
   > the back relief angle setting.   
   >   
      
      I don't know , I'll look at the ebay purchase info to see what the   
   grind medium is - the closest match I can find is a diamond bonded   
   grinding media .   
      My fixture  has 2 angles on the bottom , cutting edge and back relief   
   . The collet holder is indexed for 2 3 4 and 6 flutes . Does a right   
   fine job too .   
      I did find the carbide cutters I was looking for . I can cut chunks   
   oversize with a diamond blade and grind to final shape after brazing   
   them to the shank .   
   --   
   Snag   
      I appreciated foreign cultures more   
   when they stayed foreign ...   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)