From: wolverine01@charter.net   
      
   On 10/19/2024 3:38 PM, sticks wrote:   
   > Got my baseplates on and both the brake breakaway switch and the 6 prong   
   > plug.  Quite the job.   
   >   
   >    
   >   
   > Everything seems to be working, except the power wire I put in to charge   
   > the battery.  So I checked my F-150 and the RV, and I'll be damned if   
   > neither of them are showing any power there either on their respective 7   
   > prongs.  Other lights show voltage.  I tried with both a volt meter and   
   > a test light.  I must be missing something somewhere.  My truck seems to   
   > have a wire going to it.  The RV has a bunch of wires.  I should be able   
   > to go to ground on the plug and then the power and see voltage right?   
      
   OK, all is good.  Found out on the F-150 you have to put in two fuses   
   for it to get power to the back.  I don't know why they don't do it by   
   default.  Instead, I put the fuse in the Bronco in-line fuse holder on   
   the power wire and it showed voltage at the 6 prong plugin.  At least I   
   know it's all wired correctly and working.   
      
   Now I just gotta figure out the RV on whether or not it has power at the   
   7 prong.  That's that crazy Mercedes shit where it has to "sense" a   
   vehicle before it sends power.  It can wait till tomorrow.   
      
      
   --   
   I Stand With Israel!   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)