From: MrT@home   
      
   "guy25"  wrote in message   
   news:guy25.63490cb@audiobanter.com...   
   > First of all I'd like to thanks everybody in this forum so friendly and   
   > helpful. I removed the L1 coil and inspected, it turn out O.K but the 3   
   > Ceramic resistor  next to it was got over heated. It's: R1=0R47-7W ,   
   > R3=5R6-7W and R4=8R2-7W. Please take a look at the speaker diagram. I'm   
   > sorry, can not paste the Diagram here. I have been trying Google for   
   > these resistor with out success. Does anybody here know where to buy it   
   > please let me know. Thanks again, Guy25   
      
   You'd certainly have trouble finding generic 7 Watt resistors, but 10 Watt   
   parts should be readily available, and less likely to fail again.   
   In case you don't already know, those are 0.47ohm, 5.6 ohm and 8.2 ohm, and   
   are common values.   
      
   MrT.   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)