From: @noway.com   
      
   Jack wrote:   
   > Well... after switching channels between the push button input selector   
   > board and the tape monitor board, the bad channel switches from left to   
   > right. This indicates to me that push button switches are the problem.   
   > However, when I use the tape playback inputs on the back of the unit and   
   > flip the appropriate tape monitor flip switch, the problem continues.   
   > The tape monitor switch switches on the tape playback jacks and switches   
   > off all input from the pushbutton switches. I will have to look at the   
   > schematics and try to puzzle out this behavior.   
      
   Okay, I totally disconnected the signal wires going from the pushbutton   
   switch circuit board to the tape monitor switch circuit board and I am   
   playing from the computer through the tape play back jacks. Both   
   channels are playing fine at the moment, but being that the problem is   
   intermittent without any way to induce it (that I know of) I will just   
   have to wait a see again.   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)