-september.org> 0ebb84e2   
   From: dpierce@cartchunk.org   
      
   gregz wrote:   
   > I used a very short line and your probably right. Typical delay I measured   
   > about 7 % . However, at 2.6 lbs per cubic foot, I got up to 35% , and was   
   > hard to measure because it was a highly attenuated signal. at suggested   
   > stuffing rates, 8 oz per cu ft., more like less than 3% delay. I don't   
   > think its a transmission line if there is no signal at the end of the pipe.   
      
   How are you measuring delay? By using the phase shift?   
      
   --   
   +--------------------------------+   
   +         Dick Pierce            |   
   + Professional Audio Development |   
   +--------------------------------+   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)