home bbs files messages ]

Forums before death by AOL, social media and spammers... "We can't have nice things"

   rec.audio.tech      Theoretical, factual, and DIY topics in      41,683 messages   

[   << oldest   |   < older   |   list   |   newer >   |   newest >>   ]

   Message 41,107 of 41,683   
   Kevin McMurtrie to djh   
   Re: Yamaha RX-V750 + OTA television sign   
   07 Mar 13 20:23:53   
   
   From: mcmurtrie@pixelmemory.us   
      
   In article ,   
    "djh"  wrote:   
      
   > I got a Yamaha RX-V750 7.1 AV receiver this past weekend. I have it   
   > configured for 5.1 surround sound and use an over-the-air television antenna   
   > for viewing local programming (no cable). The audio signal I receive from   
   > NBC fluctuates significantly, this occurs in programs as well as   
   > commercials. An example would be while watching the local news the volume   
   > will be at a normal listening level throughout the entire news cast but when   
   > the station goes to commercial the sound level drops to a far less audible   
   > level for some of the commercials, not all. When the news resumes the sound   
   > level returns to normal. It is not limited to commercials only. It drops the   
   > sound level for certain programs such as The Tonight Show. When I try to   
   > watch The Tonight Show I turn the volume up to a normal listening level but   
   > the sound has a muffled quality to it.  I do not have this problem with the   
   > other national networks.  Although I have noticed some distinct sound   
   > variations on other networks such as background sound is somewhat   
   > diminished during some programming as well as commercials,  but certainly   
   > not as pronounced as NBC.  I had a Sony 5.1 AV receiver but replaced it with   
   > the Yamaha but I did not have this sound trouble with the Sony.  Am I   
   > missing something in the setup of the receiver? I've followed the setup   
   > guide to balance the speakers using the microphone. I'm using optical cable   
   > to connect the television to the receiver. Has anyone else run into this   
   > problem? Thank you for any help or advice you might have.   
      
   It sounds like Dolby Dialnorm problems with AC-3 decoding.  It's a   
   headroom adjusting hack designed accommodate low and high dynamic range   
   programs.   
      
   A perfect receiver will not fix the problem.  Many TV stations don't   
   pass through the correct Dialnorm value.  Even when they are, it's   
   probably wrong from the program too.  The Tonight Show with Jay Leno is   
   an excellent example of how Dialnorm should not be used.  It uses a high   
   dynamic range profile but it's recorded with a very compressed dynamic   
   range.  In a feeble attempt to create a "live" atmosphere, people mixing   
   the sound crank up the volume for a moment when they notice that the   
   crowd is reacting.   
   --   
   I will not see posts from Google because I must filter them as spam   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)   

[   << oldest   |   < older   |   list   |   newer >   |   newest >>   ]


(c) 1994,  bbs@darkrealms.ca