Forums before death by AOL, social media and spammers... "We can't have nice things"
|    rec.audio.tubes    |    Tube-based amplifiers... that go to 11    |    52,877 messages    |
[   << oldest   |   < older   |   list   |   newer >   |   newest >>   ]
|    Message 51,065 of 52,877    |
|    Ian Bell to Andre Jute    |
|    Re: Making a mono-from-stereo cable    |
|    06 Sep 10 20:48:06    |
      178b48c5       XPost: uk.rec.audio       From: ruffrecords@yahoo.com              Andre Jute wrote:       > Time to return to tech-talk.       >       > In a modest-sized room (by horn standards anyway) I want to rig up a       > singleton of my modded semi-Fidelio bicor horns for Lowther PM6A. I       > thought I'd do the monoing in a specially made 1 metre cable between       > the CD player and the power amp.       >       > The QUAD CD expects to see at least 10K impedance on its outputs.       > Output of the CD player is 2Vrms and about 0.5Vrms of that is required       > to drive the amp to enough power to handle the horns, so high value       > resistors can be used in the monomaker if there is any advantage to be       > gained.       >       > However, the sound is NOT intended to be reprocessed as stereo       > downstream (home installation, not studio); if I want stereo again,       > i'll just plug in a stereo cable.       >       > The pot on the integrated amp is probably (the board won't be here       > until Tuesday and i can't read the spec on the piccie) 50K Alps but I       > can replace it with a DACT of which I have a good selection of values.       >       > So what value resistors would you use for monoing?       >       > How many? Only two, or three?       >       > With your choice of values, what can I expect to lose from the monoing       > in bandwidth as distinct from gain?       >       > Andre Jute       > Visit Jute on Amps at       > http://www.audio-talk.co.uk/fiultra/       > "wonderfully well written and reasoned information for the tube audio       > constructor"       > John Broskie TubeCAD& GlassWare       > "an unbelievably comprehensive web site containing vital gems of       > wisdom"       > Stuart Perry Hi-Fi News& Record Review       #              I would use 3 resistors, all 10K. I think you can guess how to wire them. The       important thing is to       place them at the amp end.              Cheers              Ian              --- SoupGate-Win32 v1.05        * Origin: you cannot sedate... all the things you hate (1:229/2)    |
[   << oldest   |   < older   |   list   |   newer >   |   newest >>   ]
(c) 1994, bbs@darkrealms.ca