From: phil_a@tpg.com.au   
      
   "Jimmy"    
      
   I've consulted the mfg of the solid state amplifier I have  whether it's   
   adequate to handle such load from 4 pairs stacked ESL 57 and wired in   
   parallel with impedance multiplication through autoformer.   
      
   http://www.zeroimpedance.com/box.html   
      
      
   ** This fuckhead is just  NOT  listening  !!!!!   
      
   The Quad ESL57 is a 15ohms or greater load across the audio band up to   
   5kHz -  that means you can treat it as such when using SS amplifier or any   
   amplifier with low output impedance.   
      
      
   > This is his response: "The impedance sweet spot is above 4 ohms be the   
   > amplifier can drive 2 ohms as long as the load is not to reactive.....   
   > blah blah...   
      
      
   ** But the ESL57 is NOT a 2 ohm load  !!   
      
      
   > Sounds like ss amplifier is not suitable at all :-(   
      
   ** Bollocks.   
      
      Piss off you bullshitting fool.   
      
      
      
   ...  Phil   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)