From: phil_a@tpg.com.au   
      
   "jh"    
      
   > Hi Patrick,   
   >   
   > You're sure the tiny PT of the Fedner can handle the heater current of   
   > EL34s?   
      
   ** 6V6s are speced at 0.45amp and EL34s at 1.5 amp.   
      
   I know that 5881s are fine and they pull 0.9 amp each.   
      
   A couple of watts of extra heat in the PT is not gonna kill it.   
      
   Long as the heater voltage is above 6.1V, it should be OK.   
      
      
      
   ....   Phil   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)