From: jlgotham@gmail.com   
      
   HellO!   
   I've read posting on other forum and it draws my attention.   
      
   IS the DCR of the plate choke should be equal to the resistive value of the   
   plate load resistor if considering replacing the resistor with the plate choke?   
      
   Example: if the current plate load resistor is 1000 ohm, should I use plate   
   choke with DCR 1000 ohm??   
      
   A plate choke is a different impedance (reactance) at each frequency,   
   increasing its value as frequency goes up.   
      
   Thanks!   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)