From: toby@tobiah.org   
      
   > You really want to have an effects pedal that can be connected using the "4   
   > cable method."  That allows the pedal to use both the input and the Efx   
   > loop, routing overdrive, etc to the front end while putting reverb, etc on   
   > the Efx loop.   
   >   
   > I use a Line 6 HX-Effects that allows for this operation.  Not sure if the   
   > G1X does or not.   
      
   No, this pedal is inexpensive, and doesn't have a send loop in itself.   
   It only has one in, and one out, so it has to go in front of the amp, or   
   in the FX loop.   
      
   I assume that the FX send is post preamp, so it would be a different level than   
   the guitar going into the pedal, and the return is probably different   
   then going into the amp input.  Would the pedal be more at home in front   
   of the amp from a level standpoint, or is it likely flexible enough to   
   work either way?   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)