XPost: alt.home.repair   
   From: Paul@Houston.Texas   
      
   Colour Sergeant Bourne wrote:   
   > On 11/6/24 5:49 PM, Paul in Houston TX wrote:   
   >> Larry Wolff wrote:   
   >>> How can I tell if these bolts are stainless steel or not?   
   >>> https://i.postimg.cc/8cMgwY4Y/bolts.jpg   
   >>>   
   >>> All I know is they're heavy feeling - and magnetic.   
   >>>   
   >>> But how do I know if they're stainless short of purposefully rusting   
   >>> them   
   >>> by dipping them in acid?   
   >>   
   >> If the pic is of the actual bolts...   
   >> The bolts do not look like stainless - they look like low quality   
   >> steel bolts plated with zinc.  The manufacturing looks poor.   
   >> IMO, they are the 13 cent variety, not the $1.13 variety.  Same for   
   >> the nuts. They are the 5 cent variety, not the 55 cent variety.   
   >> There is low quality stainless but I have never seen that used in nuts   
   >> and bolts.  Threaded pieces are normally 18-8 or better and have   
   >> better machining.   
   >   
   > Whar are the tip-offs in the picture that they ared ow quality?   
      
   It's difficult to say for sure with out viewing the head markings or   
   seeing better photos.  It could be the small pixel count of the photo or   
   the zinc plating, but... the machining just does not look crisp / sharp.   
       There are striations on the bolt head and nut that are not seen on   
   quality bolts and nuts.  The nut appears to be much thinner than a good   
   quality nut.   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)