TID: Mystic BBS 1.12 A48
MSGID: 1:229/114 b27fcb91
TZUTC: -0400
Hello,

I recently received my first two US Robotics modems for my Mystic BBS.
Unfortunately, the first one was defective, but the seller refunded me.

The second modem is brand new, yet neither of them responds to AT commands.
However, the new one does dial out and can synchronize with a BBS. The issue
is that it doesn't respond to any AT commands sent to it. This is causing a
significant problem with Windows because, without proper responses to AT
commands like "OK" or "ERROR," Windows fails to recognize the modem. This also
affects SEXYZ, as it expects the modem to acknowledge its commands.

I suspect there's something I'm missing or haven't done correctly. These are
US Robotics 5686 modems, which are standard serial modems. I've tested them on
several serial ports across multiple computers, including the built-in ports
on the motherboard and special RS232 serial cards.

Does anyone know how to resolve this issue?

                VA2RFC BBS    Les M‚chins, Qu‚bec  Canada
               SysOp: rmurray    PhoneNet: 1000040 (Modem)
  Telnet: va2rfcbbs.photorm.net:23    FsxNet: 21:1/235    FidoNet: 1:229/114

--- Mystic BBS v1.12 A48 (Windows/64)
 * Origin: VA2RFC BBS (1:229/114)
SEEN-BY: 105/81 106/201 153/7715 218/700 227/114 229/110 114 300 317
SEEN-BY: 229/426 428 470 700 282/1038 291/111 292/854 320/219 322/757
SEEN-BY: 342/200 770/330 2320/105 5075/35
PATH: 229/114 426