From: sebastiasebas@gmail.com   
      
   El dimarts, 23 octubre de 2018 1:35:47 UTC+2, George Herold va escriure:   
   > On Monday, October 22, 2018 at 9:44:54 AM UTC-4, George Herold wrote:   
   > > On Sunday, October 21, 2018 at 7:50:24 PM UTC-4, Sebastia RodaMon wrote:   
   > > > Hi - I got a brand new solar cell "Eco Line ES10M36".   
   > > >   
   > > > In my garden, under full sun it provides 21 volts and 500 mA,   
   > > > and under big shadow it gives 18 volts and 30 mA.   
   > > >   
   > > > Load is a 24 volt bulb lamp in series with the Fluke.   
   > > >   
   > > > As the voltage margin is small, I want to detect the intensity   
   > > > to determine if there is sun or not.   
   > > >   
   > > > What electronic circuit would you recommend to do it ?   
   > > >   
   > > > If I place 2 resistors conected in serial,   
   > > > the voltage drop will have the same small margin the cell has ...   
   > > >   
   > > > Thanks.   
   > >   
   > > Sounds like you have some circuit working already.   
   > > I don't know (big) solar cells.  For little photodiodes and   
   > > things you can either measure the open circuit voltage   
   > > (V~log (Intensity)) or the short circuit current,   
   > > (I~ Intensity)   
   > >   
   > > George h.   
   >   
   > If your'e getting power from it, then measure I-V   
   > along the 'diode' curve... modulate something a little bit.   
   >   
   > George H.   
   > (are solar panels at all close to 'ideal diodes'?)   
      
   mr George : the solar cell is not a "working" one,   
   but a small one (30 cm x 30 cm, max 10 W) to be used as "monitor" of sun light.   
      
   Anyway, of course I want to measure I/V along the diode curve.   
      
   My problem is I know no circuit to do that.   
      
   Thanks. Ceba.   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)