From: burrynulnulfour@ppllaanneett.nnll   
      
   On 21-1-2019 17:36, Bob Engelhardt wrote:   
   > I am going to repurpose a PC PSU & I have a question about minimum   
   > loading.  Many/most PSU's require minimum loads on their outputs for the   
   > outputs to be powered,  The PSU that I have powers its outputs without   
   > loads.  Is it a bad idea to run it that way?  Thanks, Bob   
   >   
   when I use one I put  100 ohms on each output voltage.   
      
   That seems to work.   
      
   Else connect an old harddisk to provide a bit of load.   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)