From: scientist77017@gmail.com   
      
   As you can see in the picture, the switch is set to the off position.   
      
   When I test the continuity, there is no beep.   
      
   However, when I test the outgoing voltage, it is 18 Volts D.c.   
      
   What gives?   
      
      
      
   "https://www.dropbox.com/s/sngn1wyod4ni19i/Switch.jpg?dl=0"   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)