From: jasen@xnet.co.nz   
      
   On 2019-04-05, AK  wrote:   
   > As you can see in the picture, the switch is set to the off position.   
   >   
   > When I test the continuity, there is no beep.   
   >   
   > However, when I test the outgoing voltage, it is 18 Volts D.c.   
   >   
   > What gives?   
      
   disconnect the outgoing wire and check again.   
      
   > "https://www.dropbox.com/s/sngn1wyod4ni19i/Switch.jpg?dl=0"   
      
      
   --   
     When I tried casting out nines I made a hash of it.   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)